When The Volume Of Analog Devices Is Too Low - Sony MDR-HW700DS Help Manual

Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
© 2014 Sony Corporation

When the volume of analog devices is too low

Change the ATT (LINE IN) switch on the left side of the processor to "0dB."
Switch position
0dB
–8dB (default setting) Other devices
Contents list
Notes
Make sure that you turn down the volume before using the ATT (LINE IN) switch.
When the sound of analog devices is distorted (with noise, etc.), change the ATT (LINE
IN) switch to "–8dB."
When you connect a device to the TV (OPT) jacks (optical digital audio input/output
jacks)
Top > Connection > Connecting digital devices without HDMI jacks
Devices connected
Devices with low output level, such as portable devices
41
Search
>