Connection Example 4: Connecting The Processor With Devices Via An Av Amplifier (Tv Not Equipped With Arc) - Sony MDR-HW700DS Help Manual

Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
Connection example 4: Connecting the processor with
devices via an AV amplifier (TV not equipped with ARC)
See this connection example when you connect an AV amplifier between the processor and
a TV. This connection is recommended when you connect 3 or fewer HDMI devices (BD
device, etc.), except for an AV amplifier. When you connect a theater rack or a sound bar
with HDMI jacks instead of an AV amplifier, this connection is recommended.
1. Set the CONTROL FOR HDMI switch to "MODE2."
2. Connect an AV amplifier, a TV, a BD/DVD device and/or a game device to the jacks on
the rear of the DP-HW700 processor.
If the devices are connected to the TV, disconnect them from the TV, and connect
Contents list them to the processor.
HDMI IN: HDMI input
HDMI OUT: HDMI output
OPTICAL IN: optical digital input
Top > Connection
: audio signal
: video signal
: audio signal of TV
33
Search
> Connecting digital devices with HDMI jacks >