No Sound (When Devices Are Connected To The Hdmi Jacks) - Sony MDR-HW700DS Help Manual

Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
© 2014 Sony Corporation
No sound (When devices are connected to the HDMI
jacks)
Use an HDMI-authorized cable. Use a Sony High Speed HDMI cable with Cable Type
Logo.
You are playing programs that are protected by copyright protection technology (HDCP)
and are prohibited to be output via digital jacks (SACD, DVD audio discs, etc.). In this
case, connect the processor with the device using an analog audio cable, and listen to
them.
The audio signal is not being input to the processor directly.
Connect the devices via the HDMI IN jacks of the processor, or connect the device to the
TV (OPT) IN/LINE IN jacks of the processor.
When the CONTROL FOR HDMI switch of the processor is set to "MODE1," the audio
output setting on the TV must not be set to TV speaker. To output sound from this
system, select a setting other than TV speaker.
Contents list
The audio format of the input signal is not supported by the system.
The power off interlock function does not work.
Top > Troubleshooting
103
Search
> Possible causes of symptoms
[Details]
>