Distorted Or Intermittent Sound (Sometimes With Noise) - Sony MDR-HW700DS Help Manual

Help Guide
MDR-HW700DS
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
© 2014 Sony Corporation

Distorted or intermittent sound (sometimes with noise)

Charge the battery of the headphones.
If the power indicator is still off after you charge the battery, take the headphones to your
nearest Sony dealer.
Make sure there are no other wireless devices using the 2.4 GHz or 5 GHz wireless
frequency band, or there are no electromagnetic waves being generated from a nearby
microwave oven.
Change the position of the processor.
When "ANALOG" is selected with the INPUT button, set the ATT (LINE IN) switch on the
processor to "–8dB."
If you connect the headphone jack of the AV device to either of the LINE IN (L/R) jacks of
the processor, lower the volume level on the connected AV device.
Try other positions of the WIRELESS BAND switch.
When the WIRELESS BAND switch is set to "AUTO," and the channel changes
Contents list
automatically, sound may cut out momentarily. This is not a malfunction.
Low sound
Top > Troubleshooting
93
Search
> Possible causes of symptoms >