Ember Bed Lamp Replacement - Napoleon EF30G Installation And Operating Instructions Manual

6.2

EMBER BED LAMP REPLACEMENT

6.2.1 Remove the 7 screws from the bottom half of the back
of appliance as illustrated. Remove back plate.
6.2.2 Locate the ember bed lamps which are underneath
the fl ame generation cylinder drum.
6.2.3 Remove spring clip. Hold socket and pull out old lamp.
6.2.4 Hold socket and push in new lamp (DO NOT exceed
wattage or handle with bare hands).
6.2.5 Repeat steps 3 and 4 for the second lamp.
6.2.6 Secure the back plate of the appliance to the main
appliance by reattaching the 7 screws removed from
step 1.
BACK PLATE
Back View of Appliance
2 Screws On
The Side
3 Screws On The Back
LOCATE THE EMBER BED LAMPS
Flame Generation
Cylinder Drum
Bulbs with Spring Clips
EMBER BED LAMP
REPLACEMENT
19
Mantel
2 Screws On
The Side
W415-0760 / A / 01.18.10