Sewing; Manual Sewing - Pfaff 521 Instruction Manual

Sewing

10 Sewing
In the sewing mode all settings relating to the sewing operation are shown on the display.
Functions can be switched on and off by pressing a key. Values for start backtacks and end
backtacks or stitch placement can be changed directly.
In this mode a difference is made between manual sewing and programmed sewing.
The change from manual to programmed sewing is effected by pressed the PM key. In
programmed sewing the text "PM" appears on the display. Under the program numbers 1 –
2, fixed programs are deposited, which are programmed in the machine memory. The pro-
gram numbers 3 – 99 can be used for free programming of seams.
10

Manual sewing

.01
After the machine has been switched on (Chapter 7.01 Main switch) and manual sewing
has been selected with the PM key, the display appears for entering the stitch length, also
see Chapter 9.07 Entering the stitch length.
When the bartacking function is switched on, the display appears for entering the bartack
values, also see Chapter 9.08 Entering bartacks.
It is possible to switch from one display to another by pressing the Scroll key.
Other manual sewing functions, also see Chapter 7.09.02 Function keys:
Sewing ensues with pedal functions, see Chapter 7.03 Pedal.
10 - 1
2.5
A B C
3 3
Stitch placement function
on/off
Backtack suppression
Start backtack on/off
End backtack on/off
2.5
D
3 3
Raised needle position on/off
Raised roller presser on/off
Raised roller presser after thread trimming
on/off
Thread trimming on/off