Commissioning; Turning The Machine On/Off - Pfaff 521 Instruction Manual

Mounting and commissioning the machine
8

Commissioning

.05
8

Turning the machine on/off

.06
8 - 9
Check the machine, particularly the electrical wiring, for any damage.
Clean the machine thoroughly and then oil it or fill in oil (see Chapter 11 Care and
maintenance).
Have a mechanic check whether the motor of the machine can be operated with the
available power supply, and that the motor is correctly connected in the junction box. If
there are any discrepancies the machine must not be operated under any
circumstances.
Before commissioning the machine, remove grommet 1 of oil container 2.
1
Fig. 8 - 11
Turn the machine on or off, respectively (see chapter 7.01 On/Off switch).
2
Grommet 1 is only needed for
support during transportation
and must not be used while the
machine is in operation.