Entering/Changing The Code Number - Pfaff 521 Instruction Manual

Setting up
9

Entering/changing the code number

.09
2 x
No
9 - 8
Switch on the machine.
Select the input mode by pressing the TE/Speed key twice.
TE
No
101
By pressing the corresponding +/- key select the parameter group "800".
TE
No
800
Confirm the selection by pressing the corresponding +/- key.
1
TE
CODE:
Enter the code number by pressing the corresponding keys (factory code setting is
"1500"), also see Chapter 7.09.02 Key functions.
Conclude code input by pressing the corresponding +/- key.
The code input is stored until the machine is switched off at the main switch.
As long as the machine is not switched off, there is free access to all
parameters without having to enter the code number again.
2.5 2.5
VAL
II
5
1 0
1500