Table of Contents
Advertisement
Appendix B
Installing GART Drivers
When a Windows 98 operating system is installed, there are a series of un-
known devices in Windows 98 Device Manager. To install the nForce GART
drivers, use the following procedure:
1.
Extract the GART driver package to a temporary location.
GART Manager is present in Device Manager under: PCI Standard
Host CPU Bridge. Microsoft Generic Drivers are used until you up-
grade with the proper GART drivers.
2.
Go to the Device Manager
(START-->CONTROL PANEL-->SYSTEM-->DEVICE MANAGER)
3.
Look for the following devices:
- NVIDIA nForce GART Manager
- PCI Standard Host CPU Bridge
- PCI standard PCI-to-PCI bridge device
4.
Update the drivers using the ones saved into the temporary location in
step 1.
5.
Restart your system.
B-2
Advertisement
Table of Contents
