Table of Contents
Advertisement
IDE Primary/Secondary Master/Slave
Press PgUp/<+> or PgDn/<-> to select the hard disk drive category. The
specification of hard disk drive will show on the right hand according to your
selection. You can press <Enter> to enter the sub-menu. The sub-menu will
appear as the following example:
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Drive A/B
The two items allow you to set the type of floppy drivers installed. Available
options are [None], [360K, 5.25 in], [1.2M, 5.25 in], [720k, 3.5 in], [1.44M, 3.
5in], and [2.88M, 3.5in].
Video
This item allows you to set the type of video card. Available options are
[EGA/VGA], [CGA40], [CGA80], and [MONO].
The settings are CHS,LBA, Large, and Auto
The formatted size of the storage device
Number of cylinders
Number of heads
Write precompensation
Cylinder location of the landing zone
Number of sectors
3-7
AWARD BIOS Setup
Advertisement
Table of Contents
