Table of Contents
Advertisement
Chapter 3
IRQ/Event Activity Detect
Press <Enter> to enter the sub-menu and the following screen appears:
USB Resume from S3/S4
Allows the activity of USB device to wake up the system from S3 or
S4 power saving modes. Settings are Enabled and Disabled.
Wake Up by PCI CArd (PME)
These items specify whether the system will be awakened from power
saving modes (S1, S3, S4) when activity or input signal of the speci-
fied hardware peripheral or component is detected.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu. A similar screen to the
following appears:
enough circuitry receiving power to detect
power button activity or Wake Up On LAN/
Ring activity.
3-22
Advertisement
Table of Contents
