Table of Contents
Advertisement
Chapter 3
Entering Setup
Turn on the computer. When the below message appears briefly at
the bottom of the screen during the POST (Power On Self Test), press <Delete>
key or simultaneously press <Ctrl>, <Alt> and <Esc> to enter the SETUP
program.
TO ENTER SETUP BEFORE BOOT, PRESS <CTRL-ALT-
ESC>
If the message disappears before you respond and you still want to
enter SETUP, restart the system by turning off then on the power or pressing
the Reset button to try again. You may also restart by simultaneously press-
ing <Ctrl>, <Alt>, and <Delete> keys.
Control Keys
After entering the BIOS setup program, you can use the keyboard to
navigate through the setup menus and change the settings. A brief descrip-
tion of keyboard usage is listed below:
Key(s)
Move to the previous/next item
Move to the item in the left/right hand
Page
Up
+
or
Increase/decrease the numeric value or make changes
Page
Down
Enter
Select the item
Esc
Jump to the Exit menu or return to the Main menu from a sub-menu
F1
General help
F5
Restore the previous CMOS value from CMOS
F7
Load BIOS Setup defaults
F10
Save all the CMOS changes and exit
Function
3-2
Advertisement
Table of Contents
