Table of Contents
Advertisement
Chapter 3
UR2 Duplex Mode
This item allows you to select the IR half/full duplex function. Avail-
able options are [Half] and [Full].
Use IR Pins
Consult your IR peripheral documentation to select the correct setting
of the TxD and RxD signals.
Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the
physical parallel port.
Parallel Port Mode
The item allows you to select the operating mode for the parallel port.
Available options are [SPP], [EPP], [ECP], and [ECP+EPP].
EPP Mode Select
The item allows you to select the EPP version by the parallel port when
the port is set to [EPP] or [ECP+EPP] mode. Available options are
[EPP1.7] and [EPP1.9].
ECP Mode Use DMA
The item automatically specifies an DMA channel 1 or 3 for the parallel
port when it is set to [EPP] or [ECP+EPP] mode.
Game Port Address
The items disable or assign the address of the Game port.
Midi Port Address
The items disable or assign the address of the Midi port.
Midi Port IRQ
The item specifies an IRQ for the Midi port.
Init Display First
Initialize the AGP video display before initializing any other display
device on the system. Thus the AGP display becomes the primary
display. Available options are [PCI slot] and [AGP].
3-18
Advertisement
Table of Contents
