Using The Configuration Menu - D-Link DWL-2700AP User Manual

DWL-700AP User's Manual

Using the Configuration Menu

To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP
with an Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this
function, go to Control Panel > Internet Options > Connections > LAN Settings
and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator
Type the IP address and http port of the DWL-2700AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-2700AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as
shown.
Note: If you have changed the default IP address assigned to the DWL-2700AP, make
sure to enter the correct IP address.
Note: If you have changed the password, make sure to enter the correct
password.
D-Link Systems, Inc.

Type admin in the User Name field

Leave the Password field blank
Click OK

Using the Configuration Menu
).
™
1