D-Link DWL-2700AP User Manual page 61

DWL-700AP User's Manual
Device Configuration > General (continued)
Domain Name
Server 1: Enter the IP address of your primary Domain Name Server.
Domain Name
Server 2:
Load Balance:
User Limit:
Link Integrity:
D-Link Systems, Inc.
Enter the IP address of your secondary Domain Name Server.
This pull down selection enables or disabled load balancing. When
Load Balance is enabled, it allows several DWL-2700APs to balance
wireless network traffic and wireless clients. All the access points
must have Load Balance enabled and have the same SSID. It is
recommended that each access point be assigned non-overlapping
wireless channels. (e.g. 1, 6, 11)
Enter the number of load balancing users, from 0-64.
This pull-down selection enables or disables Link Integrity. When
Link Integrity is enabled, the wireless segment associated with the
AP will be disconnected whenever the connection between the AP
and the LAN is broken.
Using the AP Manager
1