D-Link DWL-2700AP User Manual page 38

DWL-700AP User's Manual
Home > Advanced Settings > Multi-SSID (continued)
SSID Broadcast: Enabled by default, disabling SSID Broadcast will make the SSID
Security: The Security options available are Open-System, Shared Key,
Note: Security Setting Limit:
When the Primary SSID is set to use one key index for WEP, you can use the 3 other
key indexes for Guest SSIDs.
If the Primary SSID is set to WPA/WPA2-Personal, or WPA-Auto-Personal, you can
only use WEP key index 1 and 4 for Guest SSIDs.
Key Type: Select HEX or ASCII. (Only when Open System or Shared Key
Key Size: Select 64-bit, 128-bit or 152-bit. (Only when Open System or Shared
Cipher Type: When using WPA-Personal, WPA2-Personal, or WPA-Auto-Personal,
Group Key
Update Interval:
PassPhrase: The passphrase is an alpha-numeric password that must be between
D-Link Systems, Inc.
invisible. Select Enable or Disable.
WPA-Personal, WPA2-Personal, or WPA-Auto-Personal.
Security is selected.)
Key is selected for Security.)
Key: Select from 1 of 4 Keys to be the active key. (Only when Open System
or Shared Key is selected for Security.)
you must select a cipher type. Available options are Auto, AES, or
TKIP.
Select the interval during which the group key will remain valid.
1800 is the recommended value, as a lower value may reduce the
transfer rate.
8-63 characters long. The password can include symbols (!?*_) and
spaces. Make sure to enter the passphrase exactly the same on all
wireless clients.