Download Print this page

D-Link DWL-2700AP Quick Installation Manual

Wireless g outdoor ap/bridge
Hide thumbs Also See for DWL-2700AP:

Advertisement

This product can be set up
using any current web
browser, i.e. Internet Explorer
or Netscape Navigator.

Before You Begin

It's best to use a computer (with an Ethernet adapter) connected to a switch to configure
the DWL-2700AP. The default IP address for the DWL-2700AP is
subnet mask of 255.255.255.0 on the wired Ethernet side. You will need to assign your
computer a static IP address within the same range as the DWL-2700AP's IP address for
the purpose of configuring the DWL-2700AP. If you need assistance assigning a static
IP address to your network adapter, please refer to the manual on the CD-ROM.
Check Your Package Contents
©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DWL-2700AP
Wireless G Outdoor Access Point/Bridge
CD-ROM (Containing Manual and Warranty)
Two Rubber Dipole Antenna
Surge Arrestor
specifications subject to change without notice. DWL-2700AP. 10132005
DWL-2700AP
Wireless G Outdoor
AP/Bridge
192.168.0.50
with a

Advertisement

loading

Summary of Contents for D-Link DWL-2700AP

  • Page 1: Before You Begin

    IP address to your network adapter, please refer to the manual on the CD-ROM. Check Your Package Contents ©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-2700AP. 10132005...
  • Page 2 Check Your Package Contents (continued) PoE base unit RF jumper cable 30M Ethernet cable Grounding wire Power cord Power Adapter 8 Screws and rubber ring...
  • Page 3 Check Your Package Contents (continued) Mounting Option A Mounting Option B If any of the above items are missing, please contact your reseller. Mounting Kit Mounting Kit Wall Mount Screws...
  • Page 4 Important Information authorities. Failure to do so may void the D-Link product warranty and may expose the end user or the service provider to legal and financial liabilities. D-Link and its resellers or distributors are not liable for injury, damage or violation of regulations associated with the installation of outdoor units or antennas.
  • Page 5 Physical Installation for your DWL-2700AP Step 1: Connect the supplied Ethernet cable with the waterproof enclosure to the Ethernet port on the DWL-2700AP and attach the grounding wire.
  • Page 6 Physical Installation for your DWL-2700AP (continued) Step 2: Install the two dipole antennas to the antenna connector, and attach the grounding wires.
  • Page 7 Physical Installation for your DWL-2700AP (continued)
  • Page 8 Physical Installation for your DWL-2700AP (continued) Step 3: Install the mounting kits. You can select between two mounting options. Mounting Option A:...
  • Page 9 Physical Installation for your DWL-2700AP (continued) A complete DWL-2700AP with Mounting Option A should look like this.
  • Page 10 Physical Installation for your DWL-2700AP (continued) Mounting Option B: A complete DWL-2700AP with Mounting Option B should look like this.
  • Page 11 Step 2: Connect the remaining end of the supplied Ethernet cable (Connected to the DWL-2700AP in Step 1 on page 4) to the P+ DATA OUT port on the PoE base unit. Step 3: Connect a straight through Ethernet cable from a router/switch to the DATA IN port on the PoE base unit.
  • Page 12: Using The Setup Wizard

    Using The Setup Wizard Open your Web browser and type http://192.168.0.50 URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type admin for the username and leave the password field blank. Click Once you have logged in, the Home screen will appear.
  • Page 13 Using The Setup Wizard (continued) You will see the following screens. Click Next Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 Set Wireless LAN 802.11g Connection Enter the desired SSID and the channel that you wish to use here.
  • Page 14 Using The Setup Wizard (continued) Step 3 Set Security Level The DWL-2700AP is capable of three levels of wireless encryption: No Security, WEP, and WPA-PSK. By default encryption is disabled. You can change the encryption settings for a more secure wireless network.
  • Page 15 Your Setup is Complete! Click Restart When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this. AP Mode:...
  • Page 16 Your Setup is Complete! (continued) WDS Mode: Note: Please refer to the manual for WDS Mode setup.
  • Page 17 For high gain antenna information, please contact D-Link sales at 1-800-326-1688. The external gain antenna attaches to the right side of the DWL-2700AP when the front panel (D-Link) is facing towards you. An external high gain...
  • Page 18 Notes...
  • Page 19 Notes...
  • Page 20: Echni Cal Support

    ©2005 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only.