D-Link DWL-2700AP User Manual page 24

DWL-700AP User's Manual
Home > Basic Settings >Wireless > WDS with AP (continued)
SSID Broadcast:
Channel:
Auto Channel
Remote AP MAC
Address:
Authentication:
Note: WDS is not completely specified in WiFi or IEEE standards. Communication
with other vendor's access points is not guaranteed.
D-Link Systems, Inc.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
6 is the default channel for IEEE 802.11g. All devices on the network
must share the same channel.
Note: The wireless adapters will automatically scan and match the
wireless setting.
Scan:
This option is unavailable in WDS with AP mode.
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Scan: Click Scan to view available APs in your network that will serve as
bridges.
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal or WPA-Auto-Personal to
secure your network using a password and dynamic key changes
(No RADIUS server required).
Using the Configuration Menu