Using The Configuration Menu - D-Link DWL-7700AP User Manual

DWL-7700AP User's Manual

Using the Configuration Menu

To configure the DWL-7700AP, use a computer which is connected to the DWL-7700AP with an
Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this function,
go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the
enable box.
Start your web browser program (Internet Explorer, Netscape Navigator).
Type the IP address and http port of the DWL-7700AP in the address field
(http://19.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-7700AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as shown.
Note: If you have changed the default IP address assigned to the DWL-7700AP, make sure to enter the correct
IP address.
Note: If you have changed the password, make sure to enter the correct password.
D-Link Systems, Inc.

Type admin in the User Name field

Leave the Password field blank
Click OK

Using the Configuration Menu
14