Device Configuration > General - D-Link DWL-2700AP User Manual

Using the AP Manager
DWL-700AP User's Manual
Device Configuration > General
When selecting multiple devices for configuration, some options are
unavailable for configuration by default as noted(*) below:
Device Name(*):
This allows you to change the device name for the selected
access point. You must place a check mark in the Device Name
box to change the name. This option should only be configured
when one access point is selected for configuration.
IP address and
If you've selected one device for configuration and you want
Subnet Mask(*):
to change the IP address of the device, check the IP Address
box. You can then enter an IP address and Subnet Mask for the
selected access point. This option should only be configurable
when one access point is selected for configuration. To configure
multiple devices with an IP address at one time, please reference
the previous page.
Gateway:
Enter the IP address of your gateway, typically your router
address.
0
D-Link Systems, Inc.