Assigning A Static Ip Address In Windows Xp/2000 - D-Link DWL-3200AP User Manual

DWL-300AP User's Manual
Networking Basics
®
Assigning a Static IP Address in Windows XP/2000
Note: DHCP-enabled routers will automatically assign IP addresses to the computers on the
network, using DHCP (Dynamic Host Coniguration Protocol) technology. If you are using a
DHCP-capable router you will not need to assign static IP addresses.
If you are not using a DHCP capable router, or you need to assign a static IP address, please
follow these instructions:

Go to Start.
 Double-click on Control Panel.
 Double-click on Network Connections.
D-Link Systems, Inc. 69