Pass/Fail Test Criteria - Intel SE7520AF2 Operating Manual

Intel® Server Board SE7520AF2
For operating systems, adapter cards, and peripherals not listed in this
document, there is no support commitment. Intel will consider support requests
on a case-by-case basis.
1.2

Pass/Fail Test Criteria

For each operating system, adapter, and peripheral configuration, a test passes if specific
criteria are met. Specific configurations may have had particular characteristics that were
addressed on a case-by-case basis. In general, a configuration passes testing if the following
conditions are met:
•
The operating system installed without error.
Manufacturer's installation instructions or Intel's best-known methods were used for
-
the operating system installation.
No extraordinary workarounds were required during the operating system installation.
-
The server system behaved as expected during and after the operating system
-
installation.
- Application software installed and executed normally.
•
Hardware compatibility tests ran to completion without error.
•
Test software suites executed successfully
Test and data files were created in the correct directories without error.
-
Files copied from client to server and back compare to the original with zero errors
-
reported.
Clients remain connected to the server system.
-
Industry standard test suites run to completion with zero errors reported.
-
All Intel server board SE7520AF2 testing was performed using the Intel Server Chassis SC5300.
Revision 2.1
Introduction
9