Sony VPH-G90E Installation Manual page 34

Multiscan projector

Hide thumbs Also See for VPH-G90E:

Table of Contents

Available languages

Using the PC-3000 Signal Interface Switcher

• Set the device index number of the projector to "01"

• Set the switcher number of the switcher which is connected directly to the

projector to "1," and that of the second switcher to "2," and so on.

For details, refer to the Operating Instructions of the switcher.

• When using the remote commander as a wireless remote control, activate

the remote control detector of a piece of the equipment in the system only

and deactivate those of the other equipment. Perform the setting on the

projector using "SIRCS RECEIVER" in the SET SETTING 2 menu

For setting on the switcher, refer to the Operating Instructions of the switcher.

Chapters

Table of Contents

Vph-g90u Vph-g90m