Sony VPH-G90E Installation Manual page 136

Saving the Adjustment Data
Specifying the input memory to be loaded or saved
136
(GB) Adjustments
When the same signal has been input
When the same signal has been input, the projector searches for the
Original and Custom Input Memory and loads the data of the existing
input memory for that signal. When setting/adjustment is complete, press
the MEMORY key. The adjusted data is overwritten on the loaded
Custom Input Memory, and simultaneously, on the Original Input Memory
that was the base of the loaded Custom Input Memory.
Example: When the same signal (fH = 31.5 kHz) as that registered to No.
13 Custom Input Memory is input
Original Input Memory
Input memoryNo. 00
No. 01
No. 02
No. 03
No. 12
Custom Input Memory
No. 13
No. 14
When MEM. LOAD/SAVE is set to MANUAL in the INPUT MEM.
OPTION menu, you can specify the input memory number to be loaded or
saved.
For details, see "The INPUT MEM. OPTION menu" on page 66
Saves the data automatically or
when MEMORY is pressed.
Normal adjustment block
(RAM)
Loads data.
Saves the data automatically or
when MEMORY is pressed.
.
(GB)