Sony VPH-G90E Installation Manual page 135

Example: When a new signal (fH = 31.5 kHz) is input with up to No. 13
Custom Input Memory registered
Original Input Memory
Input memoryNo. 00
No. 01
No. 02
No. 03
No. 12
Custom Input Memory
No. 13
No. 14
When the same signal has been input to another input channel
When a signal is input, the projector searches for the Original and Custom
Input Memory and loads the data most similar to the input signal. When
setting/adjustment is complete, press the MEMORY key. A new Custom
Input Memory is registered, and simultaneously, the adjusted data are
overwritten on the Original Input Memory.
Example: When the same signal (fH = 31.5 kHz) is input on another
channel with up to No. 13 Custom Input Memory registered
Original Input Memory
Input memoryNo. 00
No. 01
No. 02
No. 03
No. 12
Custom Input Memory
No. 13
No. 14
Loads data.
Saves the data when
MEMORY is pressed.
Normal adjustment block
(RAM)
Saves the data when
MEMORY is pressed.
Saves the data when
MEMORY is pressed.
Normal adjustment block
(RAM)
Loads data.
Saves the data when
MEMORY is pressed.
Adjustments
135
(GB)