Installation
1.
Position rear logs #1 and #2 against the back rebox as
seen in Figure 72.
2. Position front logs #3 and #4 between the front burner
tubes as seen in Figure 73.
3. Position side logs #5; #6 as seen in Figure 74.
4. Position logs #7 and #8 as seen in Figure 75.
5. Place logs # 9; 10 and 11 and ember chunks in front of
burner to hide the burner as seen in Figure 76.
Note: Do Not Block Burner Ports with Embers
Removal
1.
Remove embers from replace.
2. Lift the side and decorative log off of the front log and
remove it from the rebox.
3. Lift the front logs off of the burner and remove it from
the rebox.
4. Lift the rear logs over the pilot and burner and remove
from rebox.
Figure 71: Rustic log set.
Figure 72: Rustic rear log installation.
5055.66-B
Rustic Log Set Installation / Removal
Figure 73: Rustic front log installation.
Figure 74: Rustic side log installation.
Figure 75: Rustic decorative log installation.
Figure 76: Rustic complete log set.
34
BDWY.BODYB
230216-44
BRNT.BODYB