Glass Burner Installation / Removal - Pacific energy BROADWAY Installation And Operating Instructions Manual

Air Deflector Installation / Removal
Installation
Position the air de ector in the replace as seen
in Figure 78 and secure with two screws using a
screwdriver.
Removal
Remove the two screws seen in Figure 78 using a
screwdriver, and remove the air de ector from replace.
Burner Tray Installation / Removal
Installation
Place the burner tray in the replace and secure with 4
screws using a screwdriver, as seen in Figure 79.
Removal
Remove the 4 screws seen in Figure 79 using a screw-
driver, and remove the burner tray.
Glass Installation
To install the glass, evenly spread a thin layer of
crushed glass across the entire burner pan as seen in
Figure 80. Ensure glass does not cover pilot.
Rock Installation (Optional)
To install the optional rock set, place rocks making sure
no rocks are in the ame when the unit is lit.
Figure 77: Glass burner kit.
BDWY.BODYB
230216-44
BRNT.BODYB

Glass Burner Installation / Removal

Figure 78: Air de ector - Glass burner.
Figure 79: Burner tray - Glass.
Figure 80: Glass installation.
Figure 81: Rock placement.
35
Screws
5055.66-B