Ifc Module; Operating Procedure; Initializing The System For The Rst Time - Pacific energy BROADWAY Installation And Operating Instructions Manual

IFC Module

The Pro ame 2 Integrated Fireplace Control (IFC) module (Figure 3) is a device that allows automatic ignition
and pilot ame supervision, and commands the functions of the hearth Heater. It's con gured to control the
ON/OFF main burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous
pilot ignition) modes. The Pro ame 2 IFC module controls and connects directly to the pilot assembly and the
automatic valve using low electric power.
The IFC module can be powered by both an AC power supply, and battery pack for back up. The Pro ame
2 offers the added ability to control the comfort fan speed from OFF through six (6) speeds, a remotely
actuated auxiliary outlet and a dimmable light outlet. The external batteries can provide DC power to the IFC
allowing the batteries to be used only when line power is interrupted or lost, and if the Heater does not use a
combustion fan.

Operating Procedure

Initializing the system for the rst time.

1. Install 4 AA batteries into the battery holder (Figure 4) located on the rear side behind the surround below
the rebox. Install the ON/OFF switch cover (Figure 5) over top of the battery bay. Make sure that the selec-
tion switch is on the "Remote" setting.
2. Install 3 AAA batteries into the Pro ame 2 Remote Transmitter (Figure 1).
3. Plug the power cord into the Brentwood/Broadway and open the gas supply line.
4. Insert a straightened paper clip into the opening marked "PRG" of the ON/OFF battery holder cover
(Figure 4 and Figure 5) and press the program button once. The module will beep 3 times indicating that it
is ready to synchronize with a remote transmitter.
5. On the remote transmitter, push the power on button once. The remote transmitter will beep 4 times to
indicate that the remote transmitter and the control module are now synchronized. The remote transmitter
is now ready to use.
Figure 3: IFC Module.
5055.66-B
Figure 4: On - Off Switch - Battery
holder.
Figure 5: On - Off Switch cover.
8
BDWY.BODYB
230216-44
BRNT.BODYB