Remote Control Operation; System Description; Transmitter (Remote Control With Lcd Display) - Pacific energy BROADWAY Installation And Operating Instructions Manual

System Description

The Pro ame 2 Remote Control System consists of two elements:
1. Pro ame 2 Remote Control Transmitter.
2. Pro ame Integrated Fireplace Control (IFC) (Figure 3) board and a wiring harness to connect the IFC to
the gas valve and stepper motor - See "Figure 29" on page 21.

Transmitter (Remote Control with LCD Display)

The Pro ame 2 Transmitter uses a streamline design with a simple button layout and informative LCD
display (Figure 1). The transmitter is powered by 3 AAA type batteries. A Mode key is provided to Index
between the features and a Thermostat key is used to turn on/off or index through thermostat functions
(Figure 1 and Figure 2)
Figure 1: Pro ame 2 handset.
TRANSMISSION
THERMOSTAT OFF/
ON/SMART
* SEE NOTICE REGARDING * SEE NOTICE REGARDING * SEE NOTICE REGARDING
THERMOSTAT USE THERMOSTAT USE
SET POINT:
TEMPERATURE/LEVEL/STATE
DIMMER ON
COMFORT FAN
Figure 2: Pro ame 2 LCD display.
BDWY.BODYB
230216-44
BRNT.BODYB

Remote Control Operation

Blue back lit LCD display
OFF
ON
SMART
MAX
ON/OFF Key
THERMOSTAT Key
UP/DOWN Arrow Key
MODE Key
KEY LOCK
LOW BATTERY ALARM
DIMMER ON
MAX
7
ROOM
TEMPERATURE
CPI MODE
5055.66-B