Advanced Settings And Functions; Manually Controlling The Antenna - KVH Industries tracvision m5 User Manual

Manually Controlling the Antenna

Use the flowchart in Figure A-1 if you wish to control the antenna
manually.
NOTE: If you are performing this procedure as part of the satellite frequency
scan update procedure, be sure to select "NO" at the "Make Antenna Track?"
screen.
NOTE: Azimuth is referenced to forward, not a true compass heading.
TIP: Once you have finished positioning the antenna, the system will revert
to automatic control.
Figure A-1 Manually Controlling the Antenna
<Default Display>
Install Satellite?
Yes
Select Next until "Operations
Mode?" is displayed.
Operations Mode?
Yes
Get Antenna Status?
Yes
Control Antenna?
Yes
Menu
Next Return
Next Return
Next Return
Next Return
TracVision M5/M7 User's Guide
Appendix A - Advanced Settings and Functions
Man Control Antenna?
Yes Next Return
Select - or + as required,
then select Azimuth to
confirm the azimuth setting.
AZ= XXX.Xº EL= XX.Xº
- Azimuth
Select - or + as required,
then select Elevation to
confirm the elevation setting.
AZ= XXX.Xº EL= XX.Xº
- Elevation
Make antenna track?
Yes No Cancel
+
+
69