Turning The System On/Off - KVH Industries tracvision m5 User Manual

TracVision M5/M7 User's Guide
Chapter 2 - Operation

Turning the System On/Off

Turning On the System
Turning Off the System
14
You can turn the system on or off using the switchplate.
Follow the steps below to turn on your TracVision system.
IMPORTANT!
Avoid turning the vessel or changing channels for one minute
after turning on the system.
1. Make sure the antenna has a clear view of the sky.
2. Turn on your satellite TV receiver and TV.
3. Set the switchplate's Power switch to the On (|)
position.
Figure 2-3 Switchplate Power Switch
ON
OFF
MAINTENANCE
4. Wait one minute for system startup.
Follow the steps below to turn off your TracVision system.
1. Set the switchplate's Power switch to the Off (O)
position.
2. Turn off your satellite TV receiver and TV.