KVH Industries tracvision m5 User Manual page 7

3. Repeat Step 2 for each applicable polarization/band shown below.
• Linear systems:
- Vertical high
- Vertical low
- Horizontal high
- Horizontal low
• Circular systems:
- Right
- Left
If your selected satellite does not have information for one or more of these transponder
categories, you can enter the following default values instead:
Transponder Data
Frequency
Symbol rate
FEC code
Network ID
4. Enter ZAP.
5. The antenna will restart. Wait two minutes for system startup.
6. Repeat this procedure if you wish to program a second user-defined satellite.
AppNote0802 Revised
© 2008-2013 KVH Industries, Inc.
Default Value
00000
27500
Same value as other transponders with valid data
0x0000
Page 4 of 6
Revised: 10/8/2013