Setting Sleep Mode - KVH Industries tracvision m5 User Manual

Setting Sleep Mode

When the vessel has come to a stop and holds its position for one
minute (e.g., at a dock), the antenna unit enters Sleep Mode, which
locks the antenna in place to conserve power. As soon as the vessel
moves beyond a 1° - 2° window or the signal level changes
significantly, Sleep Mode automatically turns off and the system
begins tracking the satellite again (or enters Search Mode to find the
satellite).
Use the flowchart in Figure 3-8 if you wish to disable Sleep Mode, or if
you wish to restore the original Sleep Mode setting.
Figure 3-8 Setting Sleep Mode On/Off
<Default Display>
Install Satellite?
Yes
Select Next until "Operations
Mode?" is displayed.
Operations Mode?
Yes
Get Antenna Status?
Yes
Control Antenna?
Yes
Man Control Antenna?
Yes
Set Sleep on/off?
Yes
Sleep Mode: ON
On
Select On or Off as required,
then select Enter.
Menu
Next Return
Next Return
Next Return
Next Return
Next Return
Next Return
Enter Off
TracVision M5/M7 User's Guide
Chapter 3 - Settings
35