Dv Rec Audio; Auto Chapter; Disc; Disc Format - LG dr4810 Owner's Manual

Before Operation (Continued)

DV Rec Audio

You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Rec Mode Set
Rec Aspect
DV Rec Audio

Auto Chapter

Auto Chapter
When recording, chapter markers are put in specified
setting. You can change this interval to 3 minutes, 5
minutes or 10 minutes. If you select None, switch off
automatic chapter marking altogether with the No
Separation setting.
Rec Mode Set
Rec Aspect
DV Rec Audio
Auto Chapter

Disc

Disc Format

If you're recording on a DVD-R disc, the recording
mode will always be Video mode.
If you are using a DVD-RW disc, by default it will be VR
mode. You can change this to Video mode from the
Setup menu.
Disc Format
Finalize
Disc Label

Disc Protect

Audio 1
Audio 2
VR Mode None
Video Mode 3Min
Start
Press SETUP.
1 1
The Setup menu appears.
Use v / V to select the Disc option.
2 2
While the Disc option is selected, press B to
3 3
move to the second level.
Use v / V to select the Disc Format option.
4 4
Press B to move to the third level.
5 5
Start icon is highlighted.
Press ENTER.
6 6
Disc Format menu appears.
Disc Format
Select a Mode
VR Mode
Use b / B to select a desired Disc Format Mode
7 7
(VR Mode or Video Mode) then press ENTER.
It takes a few moments to initialize the disc.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
Press SETUP to exit the menu.
8 8
Disc Protect
When recording in VR mode, set to ON to prevent acci-
dental recording, editing or deleting of the disc loaded.
If you need to unlock the disc to make edits, select
OFF.
Disc Format
Finalize
Disc Label
Disc Protect
Video Mode
OFF
ON
25