Parts and Functions
This section explains names and functions of the ScanSnap parts.
■ Front
ADF paper chute (cover)
Open to use the ScanSnap.
Opening the ADF paper chute (cover) turns
on the ScanSnap.
ADF top section
Open to remove jammed documents, replace
the pad assy and the pick roller, or clean the
inside of the ScanSnap.
Extension
Pull out when scanning long documents.
ADF paper chute (cover)
You can load the document here after
opening it.
Side guide
Adjust to the width of documents to prevent
them from getting skewed.
[Scan] button
Press this button to start scanning. Can be
pressed even when the stacker is closed.
It indicates the status of the ScanSnap as follows:
Blue (lit)
Blue (flashing)
Orange (flashing) : Error
Stacker
Open to use the stacker.
Stacks up the ejected documents.
20
Parts and Functions
ADF release catch
Pull this tab to open the
ADF top section.
: Ready
: Scanning