Fujitsu ScanSnap S1500M Operator's Manual page 75

6.
Press the [Scan] button on the ScanSnap to start a scan.
The [Scan] button setting is [Duplex Scan (Double-sided)] in default. Note that you can
switch the [Scan] button setting to [Simplex Scan (Single-sided)] in ScanSnap
Manager.
For more details, refer to
You can also start scanning from the Right-Click Menu.
For more details, refer to
Do not connect or disconnect the ScanSnap and other USB devices during scanning.
Do not close the ADF paper chute (cover) during scanning.
Do not switch users during scanning. Doing so will cancel scanning.
The [Scan] button on the ScanSnap flashes in blue throughout the scan.
The [ScanSnap Manager - Image scanning and file saving] dialog box appears.
The Quick Menu appears when the scanning is completed.
How to Perform a Scan (for Windows Users)
"Scanning Only One Side of a Document" (page
"Right-Click Menu" (page
75
218).
70).