How To Configure Scan Settings - Fujitsu ScanSnap S1500M Operator's Manual

■ How to Configure Scan Settings

You can configure scan settings in the ScanSnap setup dialog box depending on your
intended use in the following procedure.
1.
Select [Scan Button Settings] from the Right-Click Menu.
For details about the Right-Click Menu, refer to
The ScanSnap setup dialog box appears.
2.
Click the [Detail] button to switch to the detail view mode.
Using the Quick Menu
Outline view
Without using the Quick Menu
Outline view
Configuring ScanSnap Manager (for Windows Users)
You can also open the ScanSnap setup dialog box by the following ways:
Double-click the ScanSnap Manager icon
Press [Ctrl], [Shift], and [Space] keys simultaneously.
The ScanSnap setup dialog box retains the display status from the last time the ScanSnap
was used. For example, if it was closed in detail view mode, the dialog box is displayed in
detail view mode next time you open it.
"Right-Click Menu" (page
.
Detail view
Detail view
87
70).