Fujitsu ScanSnap S1500M Operator's Manual page 375

4.
Press the [Scan] button on the ScanSnap to start a scan.
To enable automatic linkage with Scan to Mobile, press the [Scan] button on the ScanSnap
and start a scan while Scan to Mobile is active (the Scan to Mobile menu appears on the
menu bar).
Scanned images will be sent to the mobile device from the computer when the
scanning is completed.
When you select the [Wait until the [Send] button is clicked] checkbox in the [Scan to
Mobile - Basic] window, the [Send] button appears in the [Scan to Mobile] window. Click
the [Send] button to send the image to the mobile device.
5.
Click the [Close] button to close the [Scan to Mobile] window when the
sending of the scanned image is completed.
The [Scan to Mobile] window closes automatically when the mobile device is disconnected
from the computer.
375
Actions (for Mac OS Users)