Cleaning The Outside Of The Scansnap - Fujitsu ScanSnap S1500M Operator's Manual

Cleaning the Outside of the ScanSnap

Clean the outside of the ScanSnap in the following procedure.
How to perform cleaning
1.
Unplug the cables from the ScanSnap.
2.
Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened
with Cleaner F1/mild detergent.
Never use paint thinner or any other organic solvents.
Be careful not to get any moisture or water inside the scanner during cleaning.
It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten
the cloth with moderate quantity. Wipe off the cleaner completely to leave no residue on
the cleaned parts.
Cleaning the Outside of the ScanSnap
Cloth
424
Mild detergent or
Cleaner F1
Thinner