How To Configure Scan Settings - Fujitsu ScanSnap S1500M Operator's Manual

■ How to Configure Scan Settings

You can configure scan settings in the ScanSnap setup window depending on your intended
use. Configure the scan settings in the following procedure.
1.
Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to
(page
The ScanSnap setup window appears.
2.
Click the [Detail] button to switch to the detail view mode.
Using the Quick Menu
Outline view
Without Using the Quick Menu
Outline view
Configuring ScanSnap Manager (for Mac OS Users)
258).
You can also open the ScanSnap setup window by pressing simultaneously the [command
( )] and [S] keys on the keyboard. This operation is only enabled when ScanSnap
Manager is active (when "ScanSnap Manager" is displayed in the menu bar).
The ScanSnap setup window retains the display status from the last time the ScanSnap
was used. For example, if it was closed in detail view mode, the window is displayed in
detail view mode next time you open it.
Detail view
Detail view
275
"ScanSnap Manager Menu"