Fujitsu ScanSnap S1500M Operator's Manual page 121

3.
Change the settings for [Scan to E-mail] (If you do not want to change
any settings, go to step 4.).
1. Click the [Application Settings] button.
The [Scan to E-mail - Options] dialog box appears.
2. Change the settings.
For details about the [Scan to E-mail - Options] dialog box, refer to the ScanSnap
Manager Help.
3. Click the [OK] button to close the [Scan to E-mail - Options] dialog box.
4.
Click the [OK] button to close the ScanSnap setup dialog box.
5.
Load a document in the ScanSnap.
For details about how to load documents, refer to
Up to ten files can be attached to an e-mail message.
When you scan more than one document with the scan settings shown below, multiple files
are created. Pay attention to the number of documents to scan:
File format: JPEG (*.jpg)
[Generate one PDF file per (n) page(s)] check box is selected
Actions (for Windows Users)
"How to Load Documents" (page
121
32).