Led Multi-Purpose Display; Before First Use; Charging - Philips Norelco AT811 User Manual

ENGLISH
10

LED Multi-Purpose Display

The display provides the following information:
◗ Charging Indicator
C
-When the razor is charging, the charging light
blinks green.
◗ Full Charge Indicator
C
-When the battery is fully charged, the charging
light lights up green continuously. After
approximately 30 minutes the charging light goes
off to save energy.
◗ Low Battery Indicator
C
-When the battery is almost empty (5 or less
shaving minutes left), the charging light blinks
orange. When you turn the razor OFF the
charging light continues to blink orange for a few
seconds.
w Quick Charge Indicator
-When you charge the empty battery, the
charging light alternately blinks orange and green.
After approximately 3 minutes, the charging light
continues to blink green.
- The razor now contains enough energy for a
5-minute shave.
C
w Razor Head Replacement Indicator
-Once a year, depending on your shaving behavior,
the razor head replacement symbol will light up
orange continuously, as a reminder to replace the
razor heads.

Before First Use

w Charge the razor before you start using
it (see 'Charging'). Make sure the razor is
switched off before you start charging it.
Important
w Only use the power cord provided to charge
the razor.
w The power plug transforms 100-240V AC to
less than 24V DC.

Charging

w Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
w If the razor is subjected to a major change
in temperature, pressure or humidity, let it
acclimatize for 30 minutes before using.
w Charging or recharging requires one full hour.
w A fully charged razor has a cordless shaving
time of up to 50 minutes.
w When charging razor for the first time or
after a long period of non-use, charge until
the charging light lights up green continuously.
w Do not charge razor in a pouch.
ENGLISH
11