Led Multi-Purpose Display; Before First Use; Charging - Philips PT861/45 Manual

ENGLISH
10

LED Multi-Purpose Display

The display provides the following information:
C
◗ Charging Indicator
When the shaver is charging, the charging light
blinks green.
C
◗ Full Charge Indicator
When the battery is fully charged, the charging
light lights up continuously. After approximately
30 minutes, the charging light goes out to save
energy.
C
◗ Low Battery Indicator
When the battery is almost empty (5 or less
shaving minutes left), the charging light starts to
blink orange. When you turn the shaver OFF the
charging light blinks orange for a few seconds.
◗ Quick Charge Indicator
When you charge the empty battery, the
charging light alternately blinks orange and green.
After approximately 3 minutes, the charging light
continues to blink green.
- The shaver now contains enough energy for a
5-minute shave.
C
◗ Shaver Head Replacement Indicator
-Once a year, depending on your shaving behavior,
the shaver head replacement symbol will light up
orange continuously, as a reminder to replace the
shaver heads.

Before First Use

◗ Charge the shaver before you start using
it (see 'Charging'). Make sure the shaver is
switched off before you start charging it.
Important
◗ Only use the power cord provided to charge
the shaver.
◗ The power plug transforms 100-240V AC to
less than 24V DC.

Charging

◗ Charging, recharging or storing at
temperatures below 40ºF or higher than 95ºF
adversely affects lifetime of batteries.
◗ Charging or recharging requires one full hour.
◗ A fully charged shaver has a cordless shaving
time of up to 50 minutes.
◗ When charging shaver for the first time or
after a long period of non-use, charge until
the charging light lights up continuously.
◗ Do not charge/recharge or use shaver until
fully dried.
C
1 Connect cord directly to shaver and
connect the charging plug into any 100V to
240V AC outlet. Use only the power cord
provided.
ENGLISH
11