Toshiba RAS-18, 22SKV-E Service Manual page 94

No. Part name
Front panel 4) Push "PUSH" part under the front panel and
1
remove hooks of the front panel from the
installation plate.
5) Remove the front panel fixing screws.
(4 pcs.)
6) Take off four hooks of panel from rear side.
<How to assemble the front panel>
1) Push 3 center positions and 2 lower center
positions of the air outlet, and then hang
the hanging hooks (4 pcs.) at the top side
of the front panel to the rear plate.
2) Insert the plasma air purifier
(for model RAS-18, 22SKVR-E).
Push in the plasma air purifier until the
protrusions on both sides are completely
inserted into the holders.
If installation is incomplete, the FILTER
indicator (orange) may light.
3) Tighten four screws.
• Incomplete hanging or incomplete
Procedures
pushing may cause a dewdrops or
generation of a fluttering sound.
Protrusion Protrusion
Plasma air purifier Plasma air purifier
– 94 –
FILE NO. SVM-10050
Remarks
Installation plate
Front panel
Push
4 screws
2 Screws
four hooks
Plasma air purifier Plasma air purifier
Holder Holder
Protrusion Protrusion
Holder Holder