Toshiba RAS-18, 22SKV-E Service Manual page 57

10-2. Optional Parts, Accessories and Tools
10-2-1. Optional Installation Parts
Part Code
Indoor unit name
RAS-18SKVR-E, 18SKV-E
RAS-22SKVR-E, 22SKV-E
Y
RAS-18SKV2-E, 18SKV2-E
RAS-22SKV-ND, 22SKV-ND
RAS-18SKVR-A, 18SKV-A
RAS-22SKVR-A, 22SKV-A
Z
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and
nuts if the unit is likely to be exposed to a strong wind.
• Use Ø8 mm or Ø10 mm anchor bolts and nuts.
If it is necessary to drain the defrost water, attach
drain nipple to the base plate of the outdoor unit
before installing it.
10-2-2. Accessory and Installation Parts
Part No. Part name (Q'ty)
1
Installation plate × 1
2
Wireless remote controller × 1
3
Battery × 2
4
Remote controller holder × 1
Refrigerant piping
Liquid side (Outer diameter)
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)
Part No.
5
TOSHIBA New AIQ filter × 2
(P/N : RB-A620DE)
TOSHIBA New AIQ filter × 2
(P/N : RB-A620DE)
6
7
Mounting screw Ø4 × 25
8
Parts name
6.35 mm
28 mm
Part name (Q'ty)
Plasma pure filter × 1
(SKVR series)
l × 6
Remote controller
holder mounting screw
Ø3.1 × 16 l × 2
– 57 –
FILE NO. SVM-10050
Gas side (Outer diameter)
12.7 mm
108 mm 125 mm
Air inlet
Drain outlet
Air outlet
600 mm
Part No. Part name (Q'ty)
9
Drain nipple∗ × 1
10
Water-proof rubber cap × 2
11
Screw Ø4 × 10
<Others>
Name
Owner's manual
Installation manual
Product specification
Accessory sheet
Parts marked with asterisk (*) are
packaged with the outdoor unit.
Q'ty
one each
1
90
mm
l × 2