Paradox Magellan MG5050 Programming Manual page 70

Communicator
Step Action
1
+ [
INSTALLER CODE
2
3 [2] = Backup Phone #
[3] = Personal Phone #1
[4] = Personal Phone #2
[5] = Personal Phone #3
[6] = Personal Phone #4
[7] = Personal Phone #5
[8] = Pager #
4 [ #] + [
PHONE ENTER
5 [ ] + [
MESSAGE ENTER
Cancel Communication
Step Action
1
+ [
INSTALLER CODE
2
3 [9]
PGMs
Step Action
1
+ [
INSTALLER CODE
2
3 [ ]
PGM NUMBER
4 [
ENROLL OR ERASE PGM
5 [ ]
PGM TYPE
6 If PGM type is 1, 2, 3, or 4
[
ACTIVATION DELAY
If PGM type is 5
Goes to next available PGM.
If PGM type is 6, 7, or 8
[1] and/or [2] + [
ENTER
7 If PGM type is 1, or 2
[2-
DIGIT REMOTE CONTROL
If PGM type is 3
[2- #]
DIGIT ZONE
If PGM type is 4
[1] and/or [2] + [
ENTER
67
Details
] = flash. [
MAINTENANCE CODE
backup phone number.
]* Enter phone # (up to 32 digits) and press [
if [8] = Pager # was selected. To erase a phone number pager message, press the
[ ] key for 3 seconds.
SLEEP
] Step 5 for Pager # only. Enter pager message and press [
Details
] = flash. [
MAINTENANCE CODE
Cancels all communication with WinLoad / GSM module.
Details
] = flash. Programmed zones are lit (button or LED depending on keypad).
[
MAINTENANCE CODE
2 digits: 01 to 16
]* Wireless PGM = Open/close cover. Hardwired PGM = press [
press the [
SLEEP
1 = Follow Button
2 = Follow Button
3 = Follow Zone
4 = Follow Alarm
1 = Follow
] 2 = 1 second
3 = 5 seconds
If system is partitioned, select partition(s) and press [
] Goes to next available PGM.
01 to 32; 00 = all remote controls.
#] Goes to next available PGM.
01 to 32; 00 = all zones.
Goes to next available PGM.
If system is partitioned, select partition(s) and press [
] Goes to next available PGM.
] may also be used, however, it cannot modify the
ENTER
] may also be used.
] may also be used.
] key for 3 seconds.
or 5 = Follow Bell
or 6 = Follow Arm
7 = Follow Stay arm
8 = Follow Sleep arm
4 = 15 seconds
5 = 30 seconds
6 = 1 minute
]. Goes to next phone#, or go to step 5
].
ENTER
]. To erase a PGM,
ENTER
7 = 5 minutes
8 = 15 minutes
9 = 30 minutes
].
ENTER
].
ENTER
Programming Guide