Fujitsu Primergy RX100 S3 User Manual page 120

Chapter 4 Manual OS Installation
6
Install the Drivers for onboard SCSI controller manually.
1. When the following message appears, press the [S] key.
To specify additional SCSI adapters, CD-ROM drives, or
special disk controllers for use with Windows, including
those for which you have a devicesupport disk from a mass
storage device manufacturer, press S.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created and press the
[Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
3. Select following item and press the [Enter] key.
LSI Logic PCI SCSI/FC MPI Miniport Driver(Server 2003
32bit)
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows
default driver. Windows already has a driver that you can
use for "LSI MEGARAID Products for Windows 2003(x86)"(or
"LSI Logic PCI SCSI/FC MPI Miniport Driver(Server 2003
32bit)) Unless the device on the floppy disk, you should
use the driver in Windows.
5. Follow the instructions in the window to perform installation
The message which prompts you to set the floppy disk appears during the installation, set
the driver disk and push the [Enter] key.
7
Follow the instructions from the setup program to continue the installation
procedure.
If a message indicating that the driver has not passed Windows Logo testing to verify its
compatibility with Windows appears, select [Yes] to continue the installation procedure.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.127).
9
Install the LAN driver advanced set up tool.
For information about onboard LAN driver advanced setup tool, refer to "5.6.1 BACS
Installation" ( pg.157). For information about LAN card advanced setup tool, refer to "5.7.1
Intel® PROSet Installation" ( pg.165).
10
Install the GEM318 driver.
120