Raid And Disk Wizard - Fujitsu Primergy RX100 S3 User Manual

3.1.3 RAID and Disk Wizard

Configure RAID, and create and format hard disk partitions.
1
Click [RAID and Disk Wizard: RAID configuration and hard disk partitioning /
formatting].
The [Configuration for Disks and RAID Controllers] window appears.
Only array controllers already installed are displayed.
2
Select the method of RAID configuration.
To install the OS while maintaining the established RAID environment
Select [Logical Drive View], and add partitions as necessary. For more details, refer to "
Installation While Maintaining the Established RAID Environment" ( pg.60).
To configure RAID
Select [Mass Storage Controller View], and add controllers as necessary. For more details, refer
■
to " Configuring RAID" ( pg.61).
3
Set items and click [leave wizard].
The RAID and Disk wizard closes.
PRIMERGY RX100 S3 User's Guide
■
3
59