Workflow - Fujitsu Primergy RX100 S3 User Manual

1.5 Workflow

Use the following workflow from server installation to start of operation.
Installing the server
Referring to "Safety Precautions" and "Start Guide", install the server to a suitable place.
Preparing the server
- install internal options
- Set hardware
Referring to "2.1 Preparation on the server ", "Chapter7 Installing Internal Options", and
"Chapter8 Hardware Configuration/Utilities", prepare the server.
Selecting the installation method
Referring to "2.2 Selecting the Installation Method", decide what installation method to use.
ServerStart, a software program that enables everything from OS installation/setup to the installation of high
reliability tools to be performed in one operation, comes with this server. It is recommended that ServerStart is
used to perform installation.
Checking precautions on installation
Before installing the OS, check the precautions on installation by referring to "2.3 Precautions on Installation".
Using ServerStart
Referring to "Chapter3 OS Installation Using ServerStart",
perform OS Installation.
Installing internal options
Referring to "Chapter 7 Installing Internal Options", install the internal options.
Procedures before operation
Before operating the server, refer to "Chapter 5 Operations after OS installation".
High reliability tool installation
When the OS is installed manually, it is necessary to install high reliability tools.
When you performed batch installation using ServerStart, ServerView requires settings before server operations.
Refer to "Chapter 6 High Reliability Tools".
PRIMERGY RX100 S3 User's Guide
OS installation
Manual installation
Referring to "Chapter 4 Manual OS Installation",
perform OS installation.
Start Operations
1
37