ATEN CS-104 User Manual page 10

The Following DIP Switch settings are for the first-stage CS-104 ONLY
1
ON
OFF
ON
OFF
The DIP Switch settings for the second and third-stage CS104s are all switches off.
FUNCTION
The Foot Switch is an extension of the front panel Push Button, both have the same function. Each time the
Foot Switch is stepped on, a different computer is selected.
Foot Switch part #
CONNECTION
The Foot Switch is connected to the CS-104 through a RJ-11 phone jack which is located on one side of the unit.
If you plan to install an ON/OFF switch to
work with the Push Button, check the
diagram to the right to ensure correct switch
connection.
DIP Switch Number
2 3
ON X
ON X
OFF X
OFF X
2X-001 (Large)
2X-002 (Small)
Function
4 Scan Time
ON 3 Seconds
ON 10 Seconds
ON 20 Seconds
ON 40 Seconds
1 2 3 4 5 6